Products
Your basket is empty
Crosby Forged Steel Short Eyebolts M6
CRO2792
Price ex VAT: £22.90 Each
Forged steel, quenched and tempered.
Designed to be inserted into a tapped hole of at least the tapped length plus one half the diameter of the bolt. These bolts are supplied with fitting instructions.
The ultimate load is five times the manufacturers working load.
Specification
Type: M279
Thread: M6
Thread Length: 13 mm
Internal Eye Diameter: 19.2 mm
Vertical WLL: 200 kg
Loads may be applied at an angle but the working load limit should be reduced as follows. If the direction of the pull is 450 the adjusted working load will be 30% of rated load. If the pull is 900 the adjusted working load will be 25% of the rated load.
Please Note: The pull must be in the same plane as the eye [+/- 5°]. For lifting purposes choose eyebolts M12 or greater.